Allusions

Our most relevant references about Hyperbaric Chambers and Underwater Systems made by IBERCO since 1984.

  • Diving Clubs from Murcia Region (Spain) bought PROTECTOR for refilling SCUBA tanks

  • Our Iberco safety PROTECTOR has been chosen by several nuclear power plants in Spain to provide 12 units for air refilling centers self contained breathing apparatus. Because the compressor used and the design, the facility capacity is set to 75 refills per hour in 6.7 liter bottles.

  • PLOCAN - Canary Islands Oceanic Platform, by public international competition has awarded IBERCO building a hyperbaric module containerized, including, in addition to a Hyperbaric Chamber IBERCO Model IB-180 treatment up to 60 mca, a compressor breathing air at high pressure and 13 + 2 air bottles of oxygen. It was successfully received the November 30th, 2015, in Plocan, Pto. Taliarte, Las Palmas.

  • The Council of Seville (Spain) has acquired 25 units of PROTECTOR for its air high pressure refilling center for the 25 Fire Departments in the Province of Seville.

  • A major European shipyard has hired IBERCO for the design and manufacture of six special fire protection systems for application in six submarines. At the express wish of the yard we can not show the name.

  • Manufacturing a camera multiplace IB -230 with 8 +16 seats. Indonesia destination for the Navy to install in Jakarta at the Naval Hospital Dr. MIntojardjo. Length 2,300 mm Diameter 10,000 mm with four rectangular doors 1800 mm high by 900 mm wide. It is equipped with our security system and IBERCOMATIC log data. Complies with EC 97/23, CEN-14931 and EN-16081 guidelines.

  • Design and Construction of an autonomous hyperbaric Module within a 20-foot container. With the electric generator and compressor installed in separate compartment to the hyperbaric chamber treatments are possible anywhere in extreme conditions between -20ºC and +40ºC. The IBERCOMATIC system provides all the information of all system variables and their automated system provides the necessary security alarms. AQAP 2110 requirements and perfomances of Directives 14931 and 16081. Owner: Military Emergency Unit of the Ministry for Defence Spanish.

  • The PoliTechnical University of Gerona (Spain) has hired Iberco for the design and manufacture of a hydraulic chamber for testing of subsea equipment up to 1400 meters deep. The equipment must be operable by one person in all operations: opening and lift the lid to the introduction and removal of parts and the subsequent closure. Measures inner diameter 550 mm and 1700 mm net working height

  • Cartagena's City Hall has choosen our safety PROTECTOR equipment for its Fire Department

  • Jaen's City Hall (Spain) has choosen our safety PROTECTOR equipment for its Fire Department

  • IBERCO has delivered the company Navantia the fourth installment of special extinguishers for submarines Series 80

  • On day 29 February 2012, IBERCO successfully completed, the development of automatic control system IBERCOMATIC-2012 hyperbaric chambers. Its powerful features make it one of the leading systems for this purpose. It is fully configurable to the needs of the Medical Director of the eligible installation aspects. Totally reliable in operation, will provide reassurance to the entire team in a hyperbaric facility.

  • The Aquarium of Gijón purchased patented armoured cabinet IBERCO called PROTECTOR-4 for safety during refilling of SCUBA tanks up to 300 bars.

  • The CityHall of Cartagena acquires PROTECTOR-6 for the Fire Department.

  • The People's Ministry of Health of Venezuela has acquired a hyperbaric chamber IBERCO 2+16 seats, 2.1m inside diameter, for installation in INASS

  • prueba EN 2012

  • Cartagena's City Hall has choosen our safety PROTECTOR equipment for its Fire Department

  • Manufacture and installation of a multiplace hyperbaric chamber model IB-230 at Melilla city (Spain). Inner diameter 2.300 mm and 6000 mm length. Three large rectangular doors 1800 x 900 mm. Seats 2 + 12

  • The Spanish Navy has hired IBERCO to carry out works to the rescue of underwater wrecks in the Ship Search and Rescue NEPTUNE

  • The CBA - Spanish Navy Diving Centre- contract IBERCO for adapting the Directive CEN 14931 in hyperbaric complex for training their divers at great depth. We have also installed four armored units to increase the safety of SCUBA recharge centers with our PROTECTOR equipment.

  • Adapting to the rules IMCA D023 a hyperbaric chamber containerized IB-150 with changes TUNGUM pipe material and other requirements on the above document. This camera work for the company SHARK DIVER, of Romania in an oil platform in the Black Sea.
    Was delivered in March 2010.

  • Manufacturation of hyperbaric chamber IB-150 for the Bolivian Navy. It will serve in deep diving activities at Titicaca lac in the Navy Diving Center. This is the dive center in the world\'s highest 3810 meters on the sea level.
    Delivered on February.

  • Complete installation consists of a hyperbaric chamber IB-130, high pressure compressor battery air storage tanks. IBERCO won by tender in March 2010. Be operational in July 2010.

  • Contract for the Bangladesh Navy, complete installation consists of a hyperbaric chamber IB-150, four high-pressure compressors and 4 batteries of air storage bottles. The installation will be at destination, on board a warship. IBERCO won by tender in March 2010. Be operational in June 2011.

  • Mounting of a hyperbaric chamber on board a boat company with the addition of Marine PPA required to meet international standards. The camera was not making us, but was not operational as they had been provided. Finally, after testing, supplements, and our certificates became mandatory review.

  • Adapting to the rules IMCA D023 a hyperbaric chamber containerized IB-130 with changes TUNGUM pipe material and other requirements on the above document. This chamber work for the company SHARK DIVER, of Romania in an oil platform in the Black Sea.
    Was delivered in February 2010.

  • Manufacture of one unit Hyperbaric Chamber Type IB-150 for Bolivian Navy

  • Manufacturing under IMCA specificatons, of hyperbaric chamber IB-150 Series for Shark Diving, SRC - Constanta - Romania

  • Manufacturing od IB-180 series hyperbaric chamber under IMCA specifications for Shark Diving, SRC Constanta- Romania

  • From P.T. Madesa in Indonesia, we have received the third order for IB-130 series hyperbaric chamber.

  • Manufacturation of two units IB-130 series for Ardentia Marine, at Coruña - Spain

  • - Under construction, IBERCO MRD-200 hyperbaric oxygen therapy, intended for use in sports training.
    - Four units under construction belong to model IB-130, for stock.
    - One unit under construction, Model IB-150, for stock


  • New hyperbaric chamber manufactured for SHARK Divers, SRC at Constanta - Romania. Model IB-130 open container.

  • Complete module for training and sport use. Compressor and air treatment, after cooler and low pressure hyperbaric oxygenation throw hood´s assure a lovely oxygen therapy. Barcelona.

  • - Manufacture and installation in a open 20-foot container, a set consisting of a complete IBERCO hyperbaric chamber, Model B-130 and its storage batteries of air and oxygen for Shark Diving a company of professional diving located at the Port of Constanta, Romania.
    - Manufacture and installation in a open 20-foot container, a set consisting of a complete IBERCO hyperbaric chamber, Model B-130 and its storage batteries of air and oxygen for PT MADESA a company of professional diving and clinic equipments located at Jakarta, Indonesia
    - Manufacture of a complete IBERCO hyperbaric chamber, Model B-130 for POMMEC a company of professional diving supplies located at Netherland
    - Adjustment to IMCA rules and Refourbished of a hyperbaric chamber, diameter of 1,300 mm x 4,200 mm long, for TECNOSUB, a professional diving company located in Tarragona - Spain
    2007 Adjustment to IMCA rules and Refourbished of a hyperbaric chamber, diameter of 1,300 mm x 4,340 mm long, for SUMERGIA, a professional diving company located in Madrid, Spain

  • - Updating and Refourbished of a hyperbaric chamber, diameter of 1,300 mm x 4,100 mm long, for TECNOSUB, a professional diving company. Spain.
    - Adjustment to IMCA rules and Refourbished of a hyperbaric chamber, diameter of 1,500 mm x 4,500 mm long, for TECNOSUB, a professional diving company located in Tarragona - Spain.
    - Manufacture and installation of a 20-foot container, a set consisting of a complete IBERCO hyperbaric chamber, Model B-130 and its storage batteries of air and oxygen for Technical Subaquatic Services, SL, a company of professional diving located at the Port of Santa Maria, Cadiz, Spain.
    - Manufacture and installation "in situ" of an IBERCO complete hyperbaric chamber, model B-130, 5.5 kW compressor and battery, dried and filtered air for the Peruvian NGO ESCAES, region-Sechura Piura, Peru.
    - Legislative Update on two booths IBERCO CRD-200 hyperbaric oxygen therapy, intended for use in sports training, for the company ASTON Medical Barcelona.
    - IMETISA - Medical Institution - Entity dependent of the Government of the Canary Islands, we are requested the installation of an IBERCO chamber Mod. IB-230, 14 seats of hyperbaric oxygen therapy and treatment of diving accidents, with two separate compartments to 5 bars of maximum operating pressure, rectangular doors, two compressors 18.5 kw with drying, storage and filtering air, to install on the area of the University Hospital of Canry Islands at Tenerife in the city of Santa Cruz. Spain.
    - Madrid CENSALUD Clinic. Spain. Installation of a hyperbaric chamber multiplace IBERCO Model IB - 200x2, 5, for clinical use of hyperbaric oxygen therapy and treatment of diving accidents, 2,000 mm and 2,500 mm in length, five seats and / or space for a stretcher. Maximum operating pressure 5 bars.